Beijing Shougang Co.,LTDSocial Responsibility Report 2021
PrefaceⅠ Definitions
| The Company, Shougang, Shougang Co. | Beijing Shougang Company Limited |
| The Articles of Association | The Articles of Association of the Company |
| Qiangang Co. | ShougangQian'anIron&Steel Co., Ltd. (Branch of the Company) |
| Zhixin Co. | ShougangZhixinQian'an Electromagnetic Materials Co., Ltd. (Holdingsubsidiaries of the Company, holds 82.7688%) |
| Cold-R Co. | Beijing Shougang Cold Rolling Co., Ltd. (Holding subsidiary of the Company, holds 70.2806%) |
| New-E Co. | Beijing Shougang New Energy Automobile Material Technology Co., Ltd. (Holding subsidiary of the Company, holds 45.9184%) |
| Qian'an Metallurgical Co. | Qian'anShougang Metallurgical Technology Co., Ltd. (Wholly-owned subsidiaries of the Company) |
| Steel Trading Co. | Beijing Shougang Steel Trading Investment Management Co., Ltd. (Holding subsidiary of the Company, holds 51%) |
| QianshunProduction line | Forming an integrated production organization and product R & D system with Qiangang company located in Qian'an City, Hebei Province and cold rolling company located in Shunyi District, Beijing |
| Jingtang Co. | ShougangJingtang United Iron&Steel Co., Ltd. (Holding subsidiary of the Company, holds 70.1823%; Steel Trading Co., holds 29.8177%) |
| Reporting Period | From 1 January 2021 to 31 December 2021 |
II Scope of ReportThis "Beijing Shougang Co., Ltd. Social Responsibility Report 2021" covers the performance ofthe Shougang Co. and its holding subsidiaries in 2021.
Note: This report is prepared based on the Chinese text and is prepared in both Chinese andEnglish versions. In the event of any discrepancy between the Chinese and English versions,please subject to Chinese text.
Section I.OverviewShougang Co. was exclusively initiated by ShougangCorporation (renamed as Shougang Group in2017),it was established by social fundraising and was listed on the Shenzhen Stock Exchange inDecember 1999. The Company's registered capital is RMB 6,750,325,410.The theme of "scientific development", the main line of "accelerating the transformation ofeconomic development mode", and the goal of "the first-class products, the first-classmanagement, the first-class environment, the first-class benefits" have always been adhered byShougangCo.The Company lays equal stress on social benefits, environmental protection andeconomic benefits,makes great efforts in energy efficient utilization, energy saving and emissionreduction, insists on down-to-earth, fine and demanding attitude,strives to build a digital steelenterprise, and tries to build a world-class green steel company with employees, enterprises,society and environment for common development.
Section II. Protection of Shareholders' rights
Ⅰ. Corporate governance
1. Corporate governance framework
Complying with the Company Law, the Securities Law, the Guidelines for the Governance ofListed Companies, the Stock Listing Rules of Shenzhen Stock Exchange and other relevant laws,regulations, and regulatory documents, the Company continues to deepen standardized operations,strengthen scientific governance, and create innovative and interactivecommunication channels,maintain good investor relationships, constantly improve the internal control system and theconstruction of a comprehensive risk management system, strictly fulfill the obligation ofinformation disclosure, and effectively increase the quality of corporate governance operations.The Company has a corporate governance structure such as general meeting of shareholders,board of directors, board of supervisors and board of management. In 2021, the Companycontinues to improve its management system and organizational structure in accordancewithmarket changes, operational productions and development needs. During the reporting period, theCompany has 6 holding subsidiaries: ShougangZhixinQian'an Electromagnetic Material Co., Ltd.,ShougangJingtang United Iron & Steel Co., Ltd., Beijing Shougang Cold Rolling Co., Ltd.,Beijing Shougang New Energy Automobile Material Technology Co., Ltd., Beijing ShougangSteel Trading Investment Management Co., Ltd., and Qian'anShougang Metallurgical TechnologyCo., Ltd.
2. Independence of the Company in terms of business, personnel, assets,institutions, finance,etc. relative to the controlling shareholdersThe Company and its controlling shareholders maintain completely independence in terms ofbusiness, personnel, assets, institutions, finance, etc. The Company has a complete procurement,production, marketing and operational management system, has a complete product research anddevelopment institutions and personnel, andalso has the ability of independent production andoperation.II. General meetingIn accordance with the Articles of Association and theRules of Shareholders' General Meetingsandother related regulations, the Company determines the time and place for the general meeting, and
issues notice for the shareholders' general meeting in accordance with regulations. The Companyuses the methods of "on-site + online voting " to hold the general meeting of shareholders,toensure that the matters submitted to thegeneral meeting for consideration and approval are incompliance with the law and to ensure that shareholders, especially small and medium-sizedshareholders can exercise their rights.
In 2021, the company held three general meetings of shareholders, and reviewed and approved 38proposals such as The Report of the Board of Directors of Beijing Shougang Co., Ltd. in 2020, theProposal of Beijing Shougang Co., Ltd. on the 2021 Restricted Stock Incentive Plan of BeijingShougang Co., Ltd. (Revised Draft) and its abstract, the Proposal of Beijing Shougang Co., Ltd.on Amending the Articles of Association, the Proposal of Beijing Shougang Co., Ltd. on Meetingthe Conditions of Issuing Shares to Purchase Assets and Raising Supporting Funds, and theProposal of Beijing Shougang Co., Ltd. on the Report of Beijing Shougang Co., Ltd. on IssuingShares to Purchase Assets and Raising Supporting Funds and Related Party Transactions (RevisedDraft) and its abstract.The details of the general meeting of shareholders are as follows:
| Sessions | Meeting type | Percentage of investor participation | Held Date | Disclosure Date | Show Index |
| 2020 Annual General Meeting of Shareholders | AGM | 77.0498% | 29/6/2021 | 30/6/2021 | China Securities Journal, Securities Times, Shanghai Securities News, Security Daily and CNINFO (http://www.cninfo.com.cn) |
| 2021First Extraordinary General Meeting of Shareholders | EGM | 75.1881 | 29/11/2021 | 30/11/2021 | China Securities Journal, Securities Times, Shanghai Securities News, Security Daily andCNINFO (http://www.cninfo.com.cn) |
| 2021 Second Extraordinary General Meeting of Shareholders | EGM | 81.9340% | 20/12/2021 | 21/12/2021 | China Securities Journal, Securities Times, Shanghai Securities News, Security Daily andCNINFO (http://www.cninfo.com.cn) |
III. InformationdisclosureThe Company performs its information disclosure obligations in accordance with relevant laws,regulations and regulatory documents, and the relevant provisions of the Shenzhen StockExchange. The Company establishes a normalized internal audit process for informationdisclosure, continuously improves the efficiency and quality of information disclosure, andensures the truthfulness, accuracy, and completeness of information disclosure, and that there areno false records, misleading statements or major omissions. The Company should discloseinformation to investors in a timely and fair manner through the China Securities Journal,Shanghai Securities News, Securities Times,Security Daily and CNINFO.
In 2021, it completed 64 information disclosures and submitted 554 documents to Shenzhen StockExchange, including 304 public disclosure documents (including 116 Newspaper Announcements)and 250 filing documents, which is the year with the largest number of information disclosuresover the years. The accuracy rate of information disclosure reached 100% throughout the year, and
there was no situation that needed to be corrected or supplemented. It won the grade"A"ofinformation disclosure assessment of companies listed on the main board of Shenzhen StockExchange.IV.ProfitdistributionSince the establishment of the Company, it has always attached great importance to the return ofshareholders, and maintained the legitimate rights and interests of all shareholders, especiallysmall and medium-sized shareholders. According to various regulations and related requirementsissued by the regulatory authorities, the Company promptly revises and improves the terms of theprofit distribution policy in the Articles of Association, and strictly implementsthe approvalprocedures. The standard and proportion of the Company's cash dividend are clear and definite.
According to the profit distribution plan of Beijing Shougang Co., Ltd. approved at the firstextraordinary general meeting of shareholders in 2021, the Company distributes cash dividends ofRMB 1.0 (including tax) to all shareholders for every 10 shares based on the total number of6,685,423,610.00shares, with a total cash distribution of RMB 668,542,361.00, accounting for
74.91% of the distributable profits of the parent company in 2020. The capital reserve is notconverted into share capital this time.
The 2021 profit distribution plan of the Company is as follows: after the audit of Grant ThorntonLLP, the net profit of the parent company in 2021 is RMB802,053,622.97, after deducting the 10%legal surplus reserve of RMB 80,205,362.30, the profit available for investors to distribute is RMB721,848,260.67.
In view of the fact that the Company is currently promoting the issue of "issuing shares topurchase assets and raising supporting funds and related party transactions", according to therelevant provisions of the measures for the administration of securities issuance and underwritingof the CSRC, the Company is not going to make cash distribution or convert capital reserve intoshare capital this time.
The Company intends to review and arrange matters related to the profit distribution in 2021 inaccordance with relevant laws, regulations, rules, normative documents and the articles ofassociation as soon as possible after the implementation of the transaction.
The proposal is subject to the approval of the shareholders' meeting.V.Communication with investorsIn 2021, the Company has organized and heldtelephone conferences in terms of businessperformance ofthe 2020, the first quarter of 2021 and the first half year of 2021to report theindustry's development prospects, operation, production, and respondedpositively to the concernsof investors. At the same time, the Company also maintains communication with investors throughthe interactive trading platform of the Shenzhen Stock Exchange, the reception day for investorsof listed companies in Beijing, and the daily telephone hotline to answer investors’ consultationsand other ways to maintain communication with investors, and answers investors’ questions to
ensure good communication between the Company and investors.
Section III. Protection of Employee's Rights and InterestsI.The protection of employees' interests
The Company strictly implements the provisions of national and local laws, regulations andnormative documents, pays social insurance for all employeesunder the requirement of laws andregulations. Through the establishment of a perfect system, the rights and interests of employees,such as labor protection, labor compensation, break and vacation, could be ensured.For internalretired employees, the Company adjusts the basic pension of enterprise retirees with reference toBeijing Municipal Human Resources and Social SecurityBureau every year to ensure the stablelife of the retirees. For the purpose of the Company's transformation and improvement of workefficiency, the Company sticks to the people-oriented principle, makes the useof the separationand resettlement of employees, ensuresthat the relocated employeeshave stable emotion and work,in order to realize the harmonious development of employees and enterprises, and maintains thesocial harmony and stability.
The Company strictly abides by the Labor Law, Labor Contract Law and other laws, regulationsand normative documents, and strictly implements the national regulations and standards in termsof social security and labor rights and interests of employees. Firstly,according to the policies andregulations for the filing of labor relationships, the labor contract signing rate is up to 100% andthere is no illegal employment;The second is to pay employee compensation in full and on timeand pay social insurance in accordance with the regulations; Third is to strictly implements thenational working hours system, and performs the approval procedures in accordance with theregulations; The last one is to strictly implement policies for special groups such as work-relatedinjuries, non-work-related injuries, female workers (pregnancy, childbirth, lactation) and etc.
The Company strictly implements the Special Regulations on Labor Protection of FemaleEmployees, Provisions on the Scope of Taboo Work for Female Employees and other provisions,as well as various provisions of the Company's regulations on the labor protection for femaleemployees, so as to achieve gender equality in equal pay for equal work, vocational education,technical training, promotion, participation in democratic management of enterprises and otherways. Female employees are organized to participate in female health lectures and conductedspecial physical examinations, with a general survey rate reached 100%, which safeguarded thehealth and legal rights of female employees.II.Safety production
Qianshun production line and ZhixinCo. firmly established the safety concept of "people first andlife first", comprehensively promoted the construction of double prevention mechanism andessential safety management, solidly carried out the three-year special rectification of nationalproduction safety, and continuously improved the ability of risk control. First, take safetyresponsibility as the core, implement the subject investigation mechanism, and give full play to thefunction of supervision and management. Second, under the guidance of consolidating basic
management, comprehensively revise the safety production responsibility system of all employeesand optimize the occupational health management system. Third, with the goal of upgrading thedual prevention mechanism, promote the construction of risk online monitoring platform andcomprehensively improve the information management and control ability of major risks. Fourth,comprehensively complete the three-year action of special rectification of work safety with thefocus on in-depth promotion of special rectification and intrinsic safety; Fifth, focus onstrengthening the management of relevant parties, and continue to strengthen the management ofrelevant parties with the main line of accountability, performance and due diligence; Sixth, takethe innovation carrier and innovation form as the path, vigorously promote the massive trainingand precision training strategy, and build a precision training system; Seventh, under the guidanceof establishing the root and soul of safety culture, deepen the construction of safety "home"culture and create a harmonious safety culture atmosphere; Eighth, take emergency rescue andemergency disposal as the guarantee, develop the intelligent management system of emptyexpiratory bottle, and improve the ability of emergency response.
Jingtang Co. insisted on moving the gateway forward, deepened the construction of essentialsafety management and "double control" mechanism, and effectively controlled safety risks.Create 94 areas for promoting essential safety management, 52 hidden dangers were treated at thesource throughout the year, and 79 hidden dangers were formed in a prolonged period; Build aninformation-based intelligent platform for safety management, implement the main responsibilityof safety production, and promote the gradual transformation of safety management to scientificmanagement and independent management; Promote the implementation of safety day control,implement hierarchical control over high-risk operation projects, and always maintain ahigh-pressure situation; Comprehensively carry out the identification of fire risk factors, establishthe risk control list of hot work, and improve the fire management system; Strengthen the safetymanagement of relevant parties, supervise and improve the safety management system, andconstantly build a strong line of defense for safety production.III. VocationaltrainingQianshun production line and Zhixin Co. focus on the national and Beijing vocational skillimprovement action plan, combined with the overall requirements of staff team construction, takequality improvement, ability training and talent appreciation as the core, focus on pertinence,practicability and value type, adhere to the combination of theory and practice, learning andsummary, and establish a "long voyage" development system for the career of high potentialtalents in the whole life cycle. According to the positioning needs of talents at different levels suchas training reserve, backbone, core, key and strategy, five levels of talent development and trainingprojects of "wave, sail, sail, pilot and pilot" are designed to form a continuous and advanced mapof high potential talent training and development, which is continuously promoted in stages andlevels, and systematic talent training implementation projects are formulated according to thetalent ability characteristics and growth factors at different stages, Effectively realize the unifiedguidance of three talent sequences and high potential talent training, and accelerate talent growth.More than 150 training projects were organized and completed throughout the year, enabling thefull coverage of the three talent teams of operation and management, professional technology andskilled operation, further enhancing the cohesion of the enterprise and the centripetal force of the
staff, and providing strong support for the high-quality development of the Company.
Jingtang Co. has built a "four horizontal and three vertical" full staff training system to smooth thecareer development path of talents. Held a large lecture hall for leaders, rotation training classesfor middle-level leaders and training classes for young backbone, and accelerate the improvementof the comprehensive quality of leaders and reserve backbone. Implement the "blue and blueproject", select 148 pairs of mentors and apprentices to train children, give full play to the role ofstaff innovation studio, and build a platform for the growth of technical and skilled talents.Systematically carried out graded training for team leaders, and selected and commended 21 "goldmedal team leaders". Adhere to the principle of "giving priority to internal training andsupplemented by external employment" to build a team of teachers, established a closed-loopmanagement mechanism for the selection, training and incentive of internal trainers, and excavateand cultivate a team of professional internal trainers. Given full play to the advantages of"three-level skill competition", continuously improved the competition system, established anindependent recognition mechanism of vocational skills, 1635 people realize independentrecognition, and the long-term mechanism for the rapid growth of employees is more perfect.IV.Workers union activitiesThe Company conscientiously implemented all work requirements of the National Federation ofTrade Unions, Beijing Federation of Trade Unions and Hebei Federation of Trade Unions, fullyfulfilled the basic duties of the unions to safeguard the legitimate rights and interests of employeesand serve the workers wholeheartedly. The Company insisted on taking serving the overall as thecore, taking harmony as the goal, taking workers as the foundation, and focusing on the basic level,and has organized cultural and sports activities to enrich the cultural life of employees.
Focusing on celebrating the 100th anniversary of the founding of the party, Qianshun productionline and Zhixin Co. unite and lead employees to listen to the party and follow the party,concentrate on the development of the company, carry out ShougangEmployee Culture Festival,closely focus on the theme of the founding of the party and the cultural needs of employees, anddesign 29 cultural and sports activities including vigorous walking, singing competition,photography, calligraphy and painting, basketball league and so on from four dimensions andlevels, so as to show the spiritual outlook of employees and release their vitality; Organize andcarry out a series of activities such as Spring Festival, March 8th Festival, May 1st Festival andnational day seven day music, and hold activities such as the unveiling ceremony of "Shougangcalligraphy and Painting Association", vigorous walking competition, staff singing competitionand so on; Organize to watch the large-scale scene song and dance epic "song of the striver" of theall China Federation; Take advantage ofthe "best friend of Shougang"App to participate inShougang Group's "Celebrating the Centennial of the Founding of the Party" vigorous WalkingCompetition and Scholarly Shougang cultural activities, activate the cultural life of employees andfurther enhance the cohesion of the enterprise.
Jingtang Co. organized and carried out a series of activities such as the "11th Employee CultureFestival", held activities to celebrate the 100th anniversary of the founding of the CommunistParty of China, the introduction of elegant art appreciation into ShougangJingtang, summer family
time fun garden, red film screening and 2021 Steel City wedding photography, and held 2021swimming training class, employee fishing competition, employee sports meeting, football andbadminton league, focusing on the construction of employee culture, Promote the improvement ofemployees' quality and stimulate the vitality of enterprises.; Organize the third intensive trainingclass for resident lecturers of "soul post station", promote the construction of the company's soulpost station site, add 10 sets of experience and testing equipment of soul post station, build 180heartwarming post stations for grass-roots organizations, and the application project won the"psychological service boost project for excellent employees of Beijing" of Beijing Federation oftrade unions; Innovative development and operation of "warm heart Jingtang" App, through whichemployees can exchange birthday greetings online, inquire about policies, participate in online funactivities, and narrow the distance between employees through the network, so as to make thetrade union a "home for employees" with all-weather and full coverage, and a "family" with zerodistance and close heart to employees
Section IV. Honest Operation, Protection of Suppliers' and
Customers' Rights and InterestsI.Operating in good faith according to lawQianshun production linestrictly implements the job rotation management system for personnelwith business disposal rights, checks risks against business process and risk positions, formulatespreventive measures and incorporates them into the system, tightens and fastens the "cage" of thesystem. Combining institutional adjustments and business changes, the Company reorganizes therisk symptom in the business process, optimizes rights-related matters and risk management andcontrol measures, and tightens the "cage" of the system. In addition, the Company strengthens thesupervision of leaders to ensure integrity in their professions, broadens the content and methods ofanti-corruption education, and strengthens the ideological defense of party members and cadres byholding warning education conferences, anti-corruption co-construction conferences, speciallectures, visits and exchanges, and preparation of "discipline based on cases" materials. Itorganized the theme culture month of "Incorruption culture in the heart, the breeze is full ofshares". Various forms of integrity education activities are carried out, and the integrity concept of"cleanness and officialdom, diligence and integrity as a whole" is created. The atmosphere of"everyone thinks about integrity, everyone promotes integrity and everyone protects integrity” iscreated as well.
To Qianshun production line and Zhixin Co., the first is to strengthen the supervision of leaders.Hold a warning education conference, hold a warning education training course for cleanemployment in 2021, have a collective conversation with the new leaders, and conduct preFestival interview reminder conversation and integrity and self-discipline education conversationwith key personnel according to the authority in charge, so as to play the role of warningeducation. Second, compile warning cases of "using cases to say discipline" and incorporate theminto the "three meetings and one lesson" study of grass-roots party branches; Strengthen the riskprevention and control management of clean government. Comprehensively sort out andinvestigate the integrity risk points of the supervision objects and business processes of each unit,find the business risk points, formulate prevention and control measures, and rotate the positions
of the personnel with business disposal rights, so as to make the prevention and control of thesupervision objects focus on control and control. Third, organize all units to establishanti-corruption archives of key supervision objects in batches, so as to provide reference forsubsequent leaders to implement the responsibility system for building a clean and honestgovernment and the assessment and evaluation of integrity and self-discipline; Fourth, carry outthe construction of clean culture, hold the second clean culture month, establish a clean culturecolumn, create a clean culture corridor, organize family affection to help clean, hold a cleanknowledge competition, issue a notice letter to suppliers on co-construction of clean and honest,and participate in the collection of family style works of "Clean Beijing · Clean family" in Beijing,so as to form a strong atmosphere of jointly creating a clean culture.
Jingtang Co. conscientiously implements the requirements of theanti-fraud system of the Company,strengthens anti-corruption education, cultivates the integrity concept of "integrity in mind andintegrity in practice", builds the integrity education matrix of "Jingtang integrity", eliminatescommercial bribery and protects the rights and interests of shareholders, suppliers, customers andconsumers. Strengthen the risk identification and prediction of clean government, and strengthenthe prevention and control at the source in combination with the optimization of rules andregulations of Jingtang company. Investigate the current situation of aircraft side warehousemanagement, promote the full use of information management means, strengthen "technicaldefense" and "civil air defense", and reduce the risk of clean government. Focus on "adhering tothe red line of professional ethics", divide the risk level of personnel in positions with businessdisposal power, promote exchange and job rotation, and avoid the risk of integrity. Deepen thewarning education of "taking cases as lessons and promoting reform with cases", enrich the carrierof "integrity" discipline education, and deepen the quality and efficiency of "Pro integrity"families. Strengthen the clean co-construction with relevant parties and service managementobjects, sign co-construction agreements, issue notices, carry out questionnaire survey on cleanpractitioners, visit key co-construction units, jointly carry out warning education, and build a solidfoundation for cooperation with relevant parties.II.Protection of suppliers' and clients' rights and interests
1. Protection of suppliers' rights and interests
To Qianshun production lian and Zhixin Co., the first is to implement the Management Measuresfor Purchasing Suppliers, aiming at establishing an honest, high-quality, stable and sustainablecompetitive supply chain system, adhere to the principles of equality, win-win and development,and strengthen supplier evaluation. Second, establish a "Enterprise Procurement SpecificationPromotion Scheme ", and standardize the procurement mode, optimize the business process,online review and online procurement of the judges, and promote the online bidding of thesupplier system. Promote the online quotation of supplier system and the electronic signing andsealing of procurement contract, promote the enthusiasm of suppliers, avoid cumbersomedocument transmission and improve procurement efficiency. Third, in combination withIATF16949 system certification, aiming at the quality of functional materials and materialsreflected by each base, formulate Work Plan and Arrangement for Two-party Audit of FunctionalMaterials and Spare Parts, strengthen the quality source control, and promote the synchronousdevelopment of suppliers and the company. Fourth, in order to develop circular economy and
low-carbon economy, formulatingWork Plan for Green Procurement, issuing the Proposal forGreen Procurement to Suppliers and the Questionnaire on Suppliers' Environmental System,encouraging suppliers to implement environmental management system certification, and strive toachieve more environmentally friendly and low-carbon procurement varieties. Five, formulate ananti-corruption education and training plan, take "zero violation of discipline by Party members"as the goal, carry out in-depth anti-corruption education activities of "reading laws and regulations,learning cases and talking about experience", and further consolidate the ideological defense lineof Honest Employment of Party members, cadres and personnel with business disposal power.Continue to implement the eight provisions of the central government and supervise and inspectofficial vehicles, office space, official reception, weddings and funerals. 88 anti-corruption riskpoints were sorted out, 122 measures were formulated, and a "letter of integrity notification" wasissued to suppliers. On holidays, the boot of incoming suppliers' vehicles was supervised andinspected, and special rectification activities such as "two special rectification", violation of theeight provisions of the central government and "rely on enterprises and hurt on enterprises" werecarried out, creating a clean and positive procurement atmosphere.
2. Protection of clients’rights and interests
The Company adheres to the orientation of meeting the needs of users, creates service advantagesby focusing on value creation, and firmly maintains the market reputation and brand image ofShougang products. Pay attention to the needs and demands of customers, give play to the synergyof the system, and improve the strength and level of customer service; Strengthen the practicalapplication of service management evaluation results such as product competitiveness analysismodel and accurate identification of customer needs, maximize the service value and improve theservice core competitiveness of Shougang. Effectively meet the personalized needs of customers.Pay attention to the quality needs of customers, continue to strengthen the role of front-line service,mobilize production lines and R & D resources, quickly solve product quality problems andimprove user experience. Pay attention to customers' price demands, and improve users' stickinessby improving supporting supply capacity, improving quality stability, improving delivery cycle,reducing logistics costs, reasonable pricing and other measures. Respond to customer demands ina timely manner, with 967 closed-loop customer demands throughout the year, with a closed-looprate of 99%; We continuously improved the coordination mechanism of "list of problems - listingsupervision - internal tackling", tracked 30 problems and included 20 problems in the supervision.
In 2021, it has successively won 10 awards, including the "sincere partner Award" of Great WallMotor, the "excellent supplier" of CIMC and Dongfeng Honda, and the "win-win cooperationAward" of BAIC Futian. The hot-rolled high-strength wheel steel has won the "productdevelopment and market development award of China's iron and steel industry" for the first time.The market recognition of Shougang Co. products and Shougang Co services continued toimprove.
The Company insists on fair cooperation with customers in accordance with the requirements ofclean government construction, ensures legal and compliance, carries out marketing work,strengthens clean government risk prevention and management, and signs a clean government coconstruction agreement with customers and carrier fleets throughout the year. Improve the
prevention mechanism and promote the integrity of all employees. Based on the principle ofhorizontal to post and vertical to business, the risk prevention and control manual of the marketingcenter has been revised again, forming a clean government risk prevention and controlmanagement system with marketing characteristics. Re approved the personnel with businessdisposal authority in the marketing center, improved the management account, regularly trackedthe working years of the personnel with business disposal authority, and supervised the rotation ofposts to ensure that they should be transferred. The Company has carried out the establishment ofintegrity archives for key marketing supervision objects, and filed all supervision objects.
III. Product quality responsibilityQianshun production line and Zhixin Co., combine the characteristics of "long-term, arduous andimportant" of quality work to continuously create a quality culture and improve the qualityawareness of all employees. Taking the "year of improving quality and efficiency" as anopportunity andfocuing on promoting the quality management work of "taking reducing spotgoods as the main line, tackling key problems in the" double ten "as the starting point, andconsolidating the quality control ability of the consistent process". In 2021, taking the spotincidence rate as the starting point, the Company comprehensively sorted out 91 weak links andbottlenecks in management and technical quality problems. Through tackling key problems, theannual spot incidence rate was 9.54%, 0.46 percentage points lower than the target. Organize andpromote the tackling of "double ten" problems on a weekly basis. The 16 projects represented by"tackling key problems of weather resistant thin plate shape" have reached the expected goal, andthe compliance rate is 80%. By strengthening the tracking and inspection mechanism of qualityinspection, weekly Kanban and monthly regular meeting, the process control ability was improved.A total of 381 quality inspections were carried out throughout the year, and 62 potential qualityproblems were found. Supervise and implement the Kanban meeting, arrange 10 key tasks, andpromote the solution and breakthrough of key problems such as "tackling the quality of siliconsteel tension straightening and edge cutting" and "tackling the problem of tower defects". Promotethe whole process loss reduction, focusing on the four dimensions of repair, spot, quality objectionand waste loss to achieve the annual loss reduction goal.
Jingtang Co., strengthened the full caliber and whole process quality management, improved theability of quality planning and quality control, and the annual waste reduction rate decreased by
1.34 percentage points year-on-year. The project mode of "picking and listing" was implemented,95 quality problems were tackled, the completion rate reached 86%, and the hit rate of the wholeprocess of O5 board increased by 8.6 percentage points year-on-year. Improve the evaluationsystem of 41 indicators of 9 interfaces in the whole process, optimize the disposal process of 13types of abnormal problems, further standardize the interface process management, and increasethe overall progress rate of interface indicators by 15.9%. Continued to promote SPC processcontrol and set up 407 key control points in the main process of iron-steel-rolling. The processcapacity of CPK ≥ 1.0 increased by 19.1 percentage points year-on-year, and the effect ofsystematization and refinement of quality management was more remarkable.
Section V. Environmental Protection and Green Development
In accordance with the Clean Production Promotion Law and other laws and regulations,as well as
local government regulations and regulatory documents, the Company has established a perfectprofessional management organization and environmental protection management system,adheresto the long-term mechanism of environmental protection and green development, strictly abidesby various laws and regulations related to environmental protection,improves professionalmanagement system, job operating procedures and operating records of environmental protectionfacilities,and ensuresthe environmental protection facilities operate efficiently. QiangangCo. andJingtangCo. continue to maintain the "A-level" enterprise of environmental protectionperformance evaluation in Hebei Province. Qiangang Co. exported ultra-low emission advancedtechnology and management experience, and served more than 30 iron and steel enterprises intotal. CCTV news network, Xinhua News Agency and Phoenix Satellite TV respectively praisedthe green and low-carbon transformation and development of Shougang Co.
During the reporting period, all pollutants were discharged in compliance with the standards, withthe completion rate of 100% for the total amount of pollutants and 100% for the environmentalprotection of pollutants. The synchronous operation rate of environmental protection equipment is100%. The Company has no major environmental protection or other major social safetyproblems.I.Emissions of pollutants
The pollutants produced by the Company have all organized and meet the standard emissions. Forthe detailed emissions in 2021, please refer to the attached table.II.Construction and operation of pollution prevention facilities
Qiangang Co., strengthened the level of environmental protection governance, led the industry,maintained the sustainability of environmental governance, and continued to promote the greenaction plan for the iron and steel sector based on the ultra-low emission and performance class Abasic platform. In 2021, QiangangCo., started 52 environmental protection special treatmentprojects, established a project leading group, held regular project promotion meetings regularly,coordinated and solved existing problems and promoted the progress of green projects. By the endof the reporting period, 48 items had been completed, and the remaining 4 items continued to beimplemented.
Through a series of measures such as improving the environmental protection management system,adhering to daily inspection and implementing problem rectification, the Company hascontinuously strengthened the control of environmental protection facilities and daily productionoperation, and the environmental protection facilities and production facilities operatesynchronously and stably. Strengthen the maintenance management of environmental protectionfacilities, and conduct simultaneous maintenance of environmental protection facilities such asdesulfurization and denitration, dust removal and wastewater treatment with the main productionfacilities. Through self-monitoring and supervision and monitoring by the environmentalprotection department, 100% of all pollutants are discharged up to the standard.
Jingtang Co., has built 225 sets of waste gas treatment facilities such as dust removal,desulfurization and denitration to effectively treat all kinds of waste gas. The dust adopts bag dust
removal, plastic burning plate dust removal, electric dust removal and other methods; Coke ovenflue gas adopts ammonia desulfurization + medium and low temperature SCR denitration process;Sintering and pelletizing adopt circulating fluidized bed desulfurization + medium and lowtemperature SCR denitration process; Seawater desulfurization + SCR denitration process isadopted for desulfurization of self-owned power plant. A total of 12 sets of main wastewatertreatment facilities is built. It includes coking phenol cyanogen wastewater treatment system,continuous casting wastewater treatment system, hot rolling, cold rolling, medium and heavy plate,steel rolling wastewater treatment system and comprehensive wastewater treatment station. Aftertreatment, the clean water is mixed with rich seawater desalination water for reuse to realizecoupled zero discharge of wastewater. A total of five types of solid waste treatment facilities,briquette comprehensive utilization facilities and 6 ×600000 ton / p.a. slag fine grinding cementproduction lineis build, converting the blast furnace slag of iron and steel plant into high-qualitycement raw materials by adopting new processing technology; Dust removal ash and iron oxidescale from raw materials, ironmaking, hot rolling and other processes are returned to sinteringingredients for utilization. At present, all environmental protection facilities of JingtangCo.,operate well, and all processes in the whole process meet ultra-low emission standards.
The Cold-R Co., builds annealing furnace and gas-fired boiler with natural gas as fuel to reducewaste gas pollution from the source. 11 sets of waste gas treatment facilities including oil mistpurification system, acid mist purification system, bag dust removal system and alkali misttreatment system is built, and all waste gas was discharged up to standard; 1 wastewater stationwas built to discharge all wastewater up to standard after treatment through four systems: acidcontaining wastewater treatment, dilute alkali wastewater treatment, oil-bearing and finishingliquid wastewater treatment. By selecting low-noise equipment and taking vibration reductionmeasures, effectively do a good job in noise prevention and control, and install silencers at thedischarge of iron oxide powder bin; The air compressor, booster, nitrogen compressor and otherequipment wereset in the plant, and the sound insulation cover was set. The silencing tower wasbuilt at the outlet of the nitrogen generating unit. The above environmental protection facilitiesoperate well, and all pollutants are discharged up to the standard.
By upgrading the oil mist removal system of acid rolling, Zhixin Co., has solved the problem ofoil mist overflow and insufficient flue height; The construction of high-efficiency car washingstation has effectively reduced the atmospheric dust pollution in the plant; In order to avoid theproblems such as the open-air stacking of bagged iron red, the displacement of iron red and thescattering of iron red caused by the damage of iron red bag during hoisting, a rain proof shed foriron red storage under closed storage and hoisting and loading conditions has been built. All theexisting environmental protection facilities of the Company operate stably, and the pollutants aredischarged up to the standard.III. Construction of environmental impact assessment of projects andother environmental protection administrative permitsIn order to further implement energy conservation and emission reduction as well as enhance thecorporate environmental image, the Company invested various projects such as Qiangang
Co.Dust-removing Environmental Management Project and Qiangang Co.Whitening Water andExhausted Steam for Blast Furnace Slag Project, whichhave been registered on the registrationform of construction project environmental impacts. In September 2017, the Company obtained anew version of the sewage permit issued by the Tangshan Environmental Protection Bureau. InAugust 2020, the extension of the pollution discharge permit was completed, and the validityperiod was extended to 2025.
JingtangCo. adheres to the equally importance principle of production development andenvironmental protection, evaluates the environmental impact assessment project strictly inaccordance with the Environment Impact Assessment Act of China, constructs strictly inaccordance with the EIA approval during the implementation of the project. All constructionprojects are supported by construction of environmental protection facilities, to meet the “ThreeSimultaneous” management requirements for environmental protection. In April 2006, theCompany obtained the environmental impact assessment approval from the Ministry ofEnvironmental Protection (formerly the State Environmental Protection Administration(StateEnvironmental Assessment [2006] No. 181). In May 2010, it obtained the approval of the Ministryof Environmental Protection to change the environmental impact assessment (State EnvironmentalAssessment [2010] No. 11). In January 2012, it obtained the trial production approval from HebeiProvincial Environmental Protection Department (Hubei Environmental Assessment [2012] No.
17). In January 2014, it obtained the environmental protection acceptance approval for thecompletion of the first phase of the Ministry of Environmental Protection (State EnvironmentalAssessment [2014] No. 4). In December 2014, it obtained a pollutant emission permit issued bythe Hebei Provincial Environmental Protection Department. In October 2015, it obtained theenvironmental impact assessment approval for the second phase of the Hebei ProvincialDepartment of Environmental Protection (Hebei Environmental Assessment [2015] No. 359). InAugust 2017, the Company obtained a new version of the pollution discharge permit issued by theTangshan Environmental Protection Bureau; it combined with the second-stage one-stepconstruction project, the pollutant discharge permit was changed in April 2019, and the sewageoutlet of the second-stage one-step project was included in standardized management.In April2019, the Reply Letter on the Opinions on the Changes of the One Step of the Second Phase ofJingtang Co. (Hebei Environmental Assessment Letter [2019]No.465) was obtained from HebeiProvincial Department of Ecology and Environment. In April 2019, the certificate of pollutantdischarge permit change was completed, and the sewage outlets of phase II one-step project wasincluded in standardized management. The environmental protection acceptance of phase IIone-step project was completed in October 2020. The extension of the pollutant discharge permithas been completed in August 2020, and the validity period was extended to 2025.
In October 2017, Cold-R Co. is the first company that obtained the pollution discharge permit inShunyi District, Beijing. In September 2020, it submitted an application for renewal of thepollution discharge permit in accordance with relevant regulations. It passed the governmentreview at the end of October and the validity period was extended to 2025.
Zhixin Co. completed the environmental impact assessment of the High PerformanceOriented-steel Project of ShougangZhixinQian'an Electromagnetic Material Co., Ltd. in 2021. The
pollutant discharge permit was obtained according to law in July 2018, and the modification andextension of the pollutant discharge permit were completed in July 2021.IV.Emergency plans for environmental emergencies
In accordance with the Environmental Protection Law of the People's Republic of China and otherlaws and regulations and normative documents, Qiangang Co. has formulated the Emergency Planfor Environmental Emergencies. The plan focuses on strengthening the daily management andsafety prevention of production, strictly prevents all kinds of sudden environmental events,regulates and strengthens the abilities to deal with environmental emergencies, focuses onpreventing the occurrence of sudden environmental events, gradually improves the mechanism ofearly warning, disposal and rehabilitation of environmental emergencies, and establishes theCompany's emergency disposal system, which would be strong, orderly, efficient, unified andcoordinated, for emergency environmental emergencies. On this basis,Qiangang Co. alsoformulated three special plans, namelySudden Environmental Event Emergency Plan Special forAtmospheric, Sudden Environmental Event Emergency Plan Special for Water and SuddenEmergency Plan for Hazardous Wastes in Environmental Incidents, to further improve the airpollution and water pollution emergency response capacities.
According to the requirements of the Emergency Treatment Plan for Environmental Emergencies(Third Edition), Jingtang Co. identifies gas storage tanks, pipelines and benzene tanks, acidstorage tanks, liquid ammonia storage tanks and other dangerous chemicals and toxic and harmfulsubstances production, storage areas as dangerous target for emergency rescue. In accordance withthe requirements of the Emergency Response Plan for Environmental Emergencies ofShougangJingtang United Iron & Steel Co., Ltd. (Third Edition), 24 emergency drills were carriedout in 2021, including waste oil leakage, radioactive source leakage emergency drills, waste waterexceeding the standard, waste acid leakage, wharf ship offshore oil spill emergency drills, so as toensure the effective implementation of rescue in accordance with the requirements of the Plan andimprove the skills of preventing and dealing with sudden environmental pollution accidents andthe actual combat capability.
According to relevant laws and regulations, Cold-R Co., formulated a new version of EmergencyPlan for Environmental Emergencies and put it on record. According to the requirements of thePlan, Cold-R Co., organized and carried out the plan drill, timely rectify the problems found in thedrill, and enhanced the emergency response ability of environmental emergencies.
Zhixin Co. organized the preparation of Emergency Plan for Environmental Emergencies (version2021) and complete the filing. In addition, organized all units to carry out 12 emergency drills forenvironmental emergencies throughout the year, covering water, gas, sound, slag, radiation andother projects.V.Environmental self-monitoring programIn accordance with the relevant provisions of the National Key Monitoring EnterprisesSelf-Monitoring and Information Disclosure Measures (Trial) and National Key MonitoringEnterprises Pollution Source Supervision and Information Disclosure Measures (Trial) and other
relevant regulations, Qiangang Co. establishes and improves the pollution source monitoring andinformation disclosure system, formulates the Pollutant Emission Monitoring Plan 2021 andstrictly implements it. In 2021, 1380 monitoring of PM, flue gas, air quality, plant boundary noise,etc. are organized and completed as planned. The monitoring results showed that 100% of thepollutants are up to the standard.
The environmental monitoring system of Jingtang Co. consists of two parts: automatic monitoringand manual monitoring. The manual monitoring system entrusts a qualified third-party testingorganization to regularly monitor the environment of waste gas, waste water, noise, radioactivesources and other items of pollution sources in the plant according to the Annual Self-monitoringPlan for Key Monitoring Enterprises, so as to form monitoring data and reports. The annualmonitoring plan for 2021 has been completed, and all environmental protection control indicatorshave reached the standard normally.
Cold-R Co., formulated self-monitoring plan according to the requirements of pollutant dischargepermit, and supervise and test each discharge point on a daily, monthly and quarterly basis. In2021, the company's emission indicators of pollution sources will all meet the standards.
In accordance with the requirements of relevant national regulations, Zhixin Co., formulated theSelf-MonitoringPlan for 2021, strengthen internal control, and entrust a qualified third-partymonitoring organization to monitor according to the monitoring plan and plan every week, monthand quarter. Through the development of intelligent application software, locate the monitoringpoints, achieve real-time monitoring and real-time data management, and ensure the discharge ofpollutants up to the standard.VI.Administrative penalties for environmental problems during thereporting periodThere is no administrative penalty for environmental problems during the reporting period.VII.Other environmental information that should be disclosedOn the basis of adhering to the environmental protection work, Qiangang Co., Jingtang Co.,Cold-RCo., and Zhixin Co.use the national key monitoring enterprises’ self-monitoringinformation disclosure platform, website of government environmental protection department andself-established information disclosure platform, to publicize and displaythe environmentalprotection projects, operation of environmental protection facilities, names and emissions of majorpollution sources, monitoring methods, monitoring indicator names, solid waste comprehensiveutilization, etc. and actively accepts social supervision.VIII. Other environmental related informationIn order to develop circular economy and low-carbon economy, build resource-saving,environment-friendly and low-carbon oriented company, and also achieve a good and rapiddevelopment of the Company, Shougang Co. launched the preparation of environmentalresponsibility report at the end of 2016. The scope of the environmental responsibility report
includes Qiangang Co., Jingtang Co., Cold-R Co., and other subsidiaries. In April 2020, the 2020Environmental Responsibility Report of Beijing Shougang Co., Ltd. was released on the websiteof Shougang Co. (http://www.sggf.com.cn).
During the reporting period, the Company and its subsidiaries have not been punished by anyregulator in aspect of environmental protection. Meanwhile, the Company supervising and urgingrelated shareholding companies to operates in an environmentally friendly way and in compliancewith the Law of the People's Republic of China on Environmental Protection and other relatedlaws, regulations, rules and normative documents.
Section VI. Public Relations and Social Welfare
Based on the development of the enterprise, the company actively repay the society, carry forwardthe volunteer spirit of "dedication, fraternity, mutual assistance and progress", earnestly fulfill theresponsibility of social assistance, and actively do a good job in social public welfareundertakings.I.Volunteer servicesQianshun production line and Zhixin Co. improve the framework of "league organization +volunteer service team" and build a brand volunteer service team. First, in the voluntary service ofepidemic prevention and control, we should interpret the responsibility of young people withactions. Go deep into the plant area, go into the community, widely mobilize young Leaguemembers to actively participate in epidemic prevention and control, organize "Little Red Cap"young volunteers to go into the front line of epidemic prevention, and continue to carry outnucleic acid testing, vaccination, community duty and other epidemic prevention volunteerservices. More than 3000 people participated, with a total of more than 200000 service people.Second, actively practice the spirit of volunteerism. Organize young workers to participate in thebasic ability improvement training of Beijing Emergency volunteer team, and select excellentyoung people to participate in urban volunteer services for 2022 Beijing Winter Olympic Gamesand winter Paralympic Games, volunteer services at the torch relay point of Shougang Park, ChinaInternational Trade in services fair and other major national activities and volunteer serviceactivities in important places, so as to win recognition with the highest standard and best service.Third, we continued to carry out the volunteer service of "Chairman Mao Memorial Hall" and thetheme volunteer activity of "learning from Lei Feng", with a cumulative number of participantsexceeding 200.
JingtangCo.established a youth volunteer service team to contribute to the service guarantee oflarge-scale activities and show its youth in a number of "urgent, difficult, dangerous and heavy"tasks. During the epidemic period, young volunteers rushed to the forefront of epidemicprevention and control. They participated in the publicity of disease prevention knowledge,personnel information investigation, staff temperature detection, public area killing and so on, andparticipated in more than 400 people. With the Publicity Department of Caofeidian district Partycommittee (Civilization Office) and Caofeidian District Volunteer Association, we heldenvironmental protection public welfare activities in Caofeidian Forest Park to clean up garbage inpublic areas, create a civilized living environment, publicize the concept of green environmental
protection and improve the environmental protection awareness of the general public. In manylarge-scale activities such as Chairman Mao Memorial Hall and Beijing Service Trade Fair, youngvolunteers of Jingtang actively participated, were willing to contribute, and completed their taskswith careful and thoughtful service and high quality. Zhang mengyan, a volunteer of JingtangCo.,appeared on "Worker's Daily" on behalf of Shougang youth.
II.DonationswithloveQianshun production line and ZhixinCo. continue to gather people's hearts and warm people'shearts. (1) Organized the "love offering" fund-raising activities, with a total donation of RMB
400.15 thousand; (2) People oriented, visited and expressed condolences to more than 1250 people,including workers in difficulty, injured workers, model workers and veterans; Condolences to thefront-line production workers and public security policemen who stick to their posts during theSpring Festival; Distribute warm sympathy packages to more than thousands of employees whohave been relocated for the new year; Send warm service packages to more than 150 modelworkers at all levels; (3) Hold summer nursery care classes, communicate and coordinate to solvethe enrollment of employees' children, and solve the worries of employees; (4) Organize and carryout physical examination of all staff, birthday condolences and staff treatment and rest;Condolences to more than 1000 married, childbearing and retired workers.
JingtangCo. continued to gather people's hearts and warm people's hearts. (1) organized "lovegiving" fund-raising activities, with a total donation of RMB455 thousand; (2) During the twofestivals, warm activities were organized to go deep into the homes of model workers, advancedbackbones and difficult workers to express condolences to 984 workers, with a consolationamount of RMB650 thousand; RMB 2.8061 million of relief fund was paid to employees indifficulty; (3) Carry out "Spring Festival" and birthday greetings for all staff; Condolences tonearly 1000 married, childbearing and retired workers.III. Energy saving and emission reductionQiangangCo. actively responded to the national energy conservation and emission reductionpolicy by using the waste heat of blast furnace slag flushing water to provide heating for1,319,400 square meters in the plant area and local schools, hospitals and communities, replacingthe original coal-fired boiler for heating, reducing the emission of pollutants such as CO2 and SO2,and helping to defend the blue sky.
IV.Consolidate and expand the achievements in poverty alleviationand rural revitalizationThe Company has actively fulfilled social responsibilities, expand the achievements of povertyalleviation, implement consumption poverty alleviation, and help rural revitalization. Purchaseagricultural products such as potatoes in Yangyuan County, Zhangjiakou City, Hebei Province, andsets of jujube, raisins and other poverty alleviation products in Xinjiang, with a total amount ofRMB 1.3768 million.
ConclusionIn 2022, Shougang Co. will adhere to the concept of "people-oriented, honest operation, efficientdevelopment, mutual benefit and win-win, dedication to the society", and always obey to walkingwith the times, customers, shareholders and employees, and strive to build a new generation ofmetallurgical demonstration enterprise of "circular economy, energy saving and environmentalprotection, clean and high efficiency", and attempt to maximize the interests of all parties inbusiness activities, and take it from the society, dedicate it to the society, actively fulfill socialresponsibilities and help build a harmonious society.
Beijing Shougang Co., Ltd.
27 April 2022
Shougang Co. 2021 Annual Pollutant Emission
| Name of the company or subsidiary | Names of major pollutants and characteristic contaminants | Emissionmethod | Number of drains | Distribution of emission drains | Emission concentration | Implemented pollutant emission standards | Total emissions (tons) | Total approved emissions (tons) | Exceed the standard or not |
| QiangangCo. | COD (Chemical Oxygen Demand) | Discharge to rivers and lakes after treatment | 1 | Total wastewater discharge port of the Company | 1-5mg/L | 50mg/L | 0.6 | 648.99 | No |
| QiangangCo. | Ammonia Nitrogen | Discharge to rivers and lakes after treatment | 1 | Total wastewater discharge port of the Company | 0.05-1mg/L | 5mg/L | 0.02 | 64.899 | No |
| QiangangCo. | Sulfur Dioxide | Organized | 69 | Energy, Ironmaking, Steelmaking, Hot Roll, Roll. | 0-20mg/m3 | Energy、Ironmaking、Steelmaking、Hot Roll 35mg/m3，Cold Roll 50mg/m3 | 849.2 | 926.402 | No |
| QiangangCo. | Nitrogen Oxides | Organized | 69 | Energy, Ironmaking, Steelmaking, Hot Roll, Roll. | 5~35mg/m3 | Energy、Ironmaking、Steelmaking、Hot Roll 50mg/m3，Cold Roll 150mg/m3 | 1129.1 | 2220.565 | No |
| QiangangCo. | Particulate Matter | Organized | 153 | Energy, Ironmaking, Steelmaking, Hot Roll, Roll. | 1-3mg/m3 | Energy、Ironmaking5mg/m3 Steelmaking、Hot Roll, Cold Roll 10mg/m3 | 1356.7 | 1414.607 | No |
| Jingtang Co. | Sulfur Dioxide | Organized | 42 | Coke oven chimney, coke pushing、coke outlet, CDQ outlet, outlet of baghouse system after desulphurization of sintering machine, outlet of hot blast stove of no.1 and no.2 bf, lime kiln roasting, heat treatment furnace, 2 × 300mw generating units chimney exit, gas boiler chimney exit. | Coke oven chimney :<10 mg/m3; Coke pushing :<30 mg/m3、Coke outlet :<70 mg/m3; CDQ outlet :<80 mg/m3; Sintering desulfurization:<30 mg/m3; Lime kiln roasting:＜50 mg/m3; Heat treatment furnace:<50 mg/m3; Coal-fired and gas-fired generating units:<20 mg/m3. | Coke oven chimney:30 mg/m3;Coke pushing: 30 mg/m3、Coke outlet:70 mg/m3; CDQ outlet: 80 mg/m3; Sintering desulfurization: 35 mg/m3; Hot blast stove: 50mg/m3; Lime kiln roasting: 35 mg/m3; Cold rolled furnace: 50 mg/m3; Annealing furnace for continuous annealing unit and hot-dip galvanizing unit: 50 mg/m3; Coal-fired and gas-fired generating units: 35mg/m3; Gas boiler: 50 mg/m3 | 1140.70 | 2965.74 | No |
| Jingtang Co. | Nitrogen Oxides | Organized | 38 | Coke oven chimney, outlet of baghouse system after desulphurization of sintering machine, outlet of hot blast stove of no.1 and no.2 bf, lime kiln roasting, heat treatment furnace, 2 × 300mw generating units chimney exit, gas boiler chimney exit. | Coke oven chimney :<100 mg/m3; Sintering desulfurization :<50mg/m3; Outlet of hot blast stove of No.1 and No.2 BF :<150mg/m3; Continuous annealing line of cold rolling mill and hot rolling mill、annealing furnace of HDG line :<150 mg/m3; Coal-fired and gas-fired generating units :<40 mg/m3. | Coke oven chimney :130mg/m3; Sintering desulfurization :50 mg/m3; Outlet of hot blast stove of No.1 and No.2 BF、heating furnace of hot rolling mill、continuous annealing line、annealing furnace of HDG line、Roasting device of waste acid regeneration station:150mg/m3; Lime kiln roasting: 150 mg/m3; Coal-fired and gas-fired generating units:50 mg/m3; Gas boiler:150 mg/m3 | 3533.23 | 6379.92 | No |
| Jingtang Co. | Particulate Matter | Organized | 176 | Coke pushing、coke outlet, CDQ outlet, coke oven chimney, dust removal outlet of stock ground transfer station, dust removal outlet of sintering machine batching, crushing, finished products screening, dust removal outlet of sintering machine tail and ring cooler, dust removal outlet of primary flue gas of bf tapping field, secondary flue gas of bf tapping field、dust removal outlet below the blast furnace bunker, dust removal outlet of cast iron machine, dust removal outlet of blast furnace pulverized coal production, dust removal outlet of hot blast stove of bf, steelmaking electric dust removal、steelmaking secondary dedusting outlet, dust removal outlet of flame descaling, lime kiln top dust collector outlet, heat treatment furnace、dust removal of finishing mill, dust removal exit of tension leveler and welder of PLTCM, dust removal exit of iron powder warehouse, 2 × 300mw generating units chimney exit, gas boiler chimney exit. | Coke pushing、Coke outlet、CDQ outlet、Coke oven chimney:<10 mg/m3; The transfer point of stock ground:<10 mg/m3; Sintering machine batching, crushing, finished products screening、sintering machine tail and ring cooler:<10 mg/m3; primary flue gas and Secondary flue gas of BF tapping field:<10 mg/m3; Below the blast furnace bunker、cast iron machine、blast furnace pulverized coal production、hot blast stove of BF:<10mg/m3; Steelmaking electric dust removal: <20mg/m3; Steelmaking secondary dedusting、flame descaling、Lime kiln top dust collector:<10mg/m3; Heat treatment furnace、finishing mill、tension leveler and welder of PLTCM:<10 mg/m3; Iron powder warehouse:<10mg/m3; Coal-fired and gas-fired generating units:<10 mg/m3. | Coke pushing、Coke outlet、CDQ outlet、Coke oven chimney:10 mg/m3; The transfer point of stock ground:10mg/m3; Sintering machine batching, crushing, finished products screening、sintering machine tail and ring cooler :10mg/m3; Primary flue gas and Secondary flue gas of BF tapping field:10 mg/m3; Below the blast furnace bunker、cast iron machine、blast furnace pulverized coal production、：10mg/m3; Hot blast stove of BF:10mg/m3; Steelmaking electric dust removal :50 mg/m3; Steelmaking secondary dedusting :10mg/m3; Dust removal of Lime kiln top and flame descaling: 10mg/m3; Heat treatment furnace:10mg/m3; Finishing mill 10mg/m3; Tension leveler and welder of PLTCM :10mg/m3; Iron powder warehouse: 10mg/m3; Coal-fired and gas-fired generating units: 10mg/m3; Gas boiler: 10mg/m3 | 4320.49 | 4330.44 | No |
| Zhixin Co. | PM | Organized | 69 | Acid regeneration, continuous annealing furnace, normalizing annealing furnace, decarburization annealing furnace, annular furnace, hot drawing furnace, scoring | Acid regeneration<=30mg/m3, heat treatment furnace and scoring <=10mg/m3 | Heat treatment furnace, tension leveler, finishing and shot blasting 10 mg/m3, acid regeneration 30 mg/m3 | 18.005 | 27.793 | No |
| Zhixin Co. | Sulfur Dioxide | Organized | 50 | Continuous annealing furnace, normalizing annealing furnace, decarburization annealing furnace, annular furnace and hot drawing furnace | <=30mg/m3 | 30mg/m3 | 5.685 | 81 | No |
| Zhixin Co. | Nitrogen Oxide | Organized | 50 | Continuous annealing furnace, normalizing annealing furnace, decarburization annealing furnace, annular furnace and hot drawing furnace | <=100mg/m3 | 100mg/m3 | 37.512 | 131.649 | No |
| Cold-R Co. | COD (Chemical Oxygen Demand) | Organized | 1 | Wastewater stations | 10-24.2 mg/m3 | 30mg/m3 | 21.4511 | 67.5 | No |
| Cold-R Co. | Ammonia Nitrogen | Organized | 1 | Wastewater stations | 0.002-2.46 mg/m3 | 1.5(2.5) mg/m3 | 0.42035 | 3.937 | No |
| Cold-R Co. | Sulfur Dioxide | Organized | 8 | Continuous annealing furnace, annealing furnace of 1# HDG line, annealing furnace of 2# HDG line, roaster of acid regeneration station, hydrogen production generator, 1# boiler room, 2# boiler room, 3# boiler room. | 3-5mg/m3 | Continuous annealing furnace, annealing furnace of 1# HDG line, annealing furnace of 2# HDG line, Roaster of acid regeneration station, Hydrogen production generator:20 mg/m3; 1# boiler room, 2# boiler room, 3# boiler room:10 mg/m3 | 4.0452 | 18 | No |
| Cold-R Co. | Nitrogen oxides | Organized | 8 | Continuous annealing furnace, annealing furnace of 1# HDG line, annealing furnace of 2# HDG line, roaster of acid regeneration station, hydrogen production generator,1# boiler room, 2# boiler room, 3# boiler room. | Continuous annealing furnace, annealing furnace of 1# HDG line, annealing furnace of 2# HDG line:7-50mg/m3; Roaster of acid regeneration station :12-59 mg/m3; 2# boiler room :23 mg/m3; 1# boiler room, Hydrogen production generator, 3# boiler room :14-56 mg/m3 | Continuous annealing furnace, annealing furnace of 1# HDG line, annealing furnace of 2# HDG line, Roaster of acid regeneration station, Hydrogen production generator :100 mg/m3; 1# boiler room, 2# boiler room, 3# boiler room :80 mg/m3 | 53.0158 | 148.184 | No |
| Cold-R Co. | Particulate matter | Organized | 10 | Exhaust gas of tension leveler, continuous annealing furnace, annealing furnace of 1# HDG line, annealing furnace of 2# HDG line, roaster of acid regeneration station, hydrogen production generator, iron powder warehouse at acid regeneration station, 1# boiler room, 2# boiler room, 3# boiler room. | Exhaust gas of tension leveler :3.7-4.1 mg/m3; continuous annealing furnace, annealing furnace of 1# HDG line, annealing furnace of 2# HDG line, roaster of acid regeneration station, hydrogen production generator :1.3-5.6 mg/m3; iron powder warehouse at acid regeneration station, 1# boiler room, 2# boiler room, 3# boiler room:1.5-2.8 mg/m3 | Exhaust gas of tension leveler, continuous annealing furnace, annealing furnace of 1# HDG line, annealing furnace of 2# HDG line, Roaster of acid regeneration station, Hydrogen production generator, iron powder warehouse at acid regeneration station :10 mg/m3; 1# boiler room, 2# boiler room, 3# boiler room:5 mg/m3 | 18.6915 | 18.75 | No |